LAUNCH X431 CRP429C OBD2

1. Check Engine System

The diagnostic tool can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

2. Check ABS System

Read and clear DTCs data flow in the ABS system. Performs various tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.

3. Check SRS Airbag System

Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.Read and clear fault code in SRS (Airbag) system and turn off warning light of airbag for making sure engine work properly and safely.

4. Check Transmission System

Read and clear codes and view live data in transmission systems, keeps the transmission systems output optimally adapted to the speed and load. Retrieve the error information from Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually

Live Data Stream Analyse in Graph

The launch scanner CRP429c shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

Fast VIN Scan

After connection, turn the ignition key on and the system enters auto-detect mode

Battery Test

Displays battery real-time voltage once properly connected to the vehicle

11 Maintenance Reset Service

1. Reset Oil

this obd2 scanner allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil, clear the oil light .

2. Reset Brake

is important in the maintenance of electronic braking system's safety and efficiency.

3. Reset BMS

allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4. Reset DPF

specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5. Reset SAS

helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6. Reset TPMS

makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7. Reset IMMO

it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8. ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion.

9. Throttle,Electronic Throttle Position reset/learn

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair

10. Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running

11. Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off
......
Note : These special function NOT for all car models, if you are confused, Please send your car brand, model and release year to seller to check it for you .

 A30M Functions

1.Read fault Codes For All System ,such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc

2. Bi-Directional/Active Test + Adaptation + Matching

3. Full OBD II and EOBD functions

4. 21 Maintenance Functions+Auto VIN Scan Tool

5. Support 115 vehicle brands

6. Live Data Stream Graphing + Data Record+Remote Diagnostic Car Scanner

7. Vehicle owner community

8. Compatible with both Android / iOS handsets and tablets

9. Palm-sized, portable, and powerful

10.No area and Car model Limited

11.Read Voltage of car power supply

12.Easy Find OBD2 interface with ligh

 vag drive box b-0-s-c-h edc15/me7 obd2 immo deactivator corresponds

to the B-0-s-c-h control unis types EDC15 (Diesel) and ME7 (Patrol). 

The EDC15 control for diesel engines is installed in the models of brands 

V--W, A-U-D--1,S-E-A-T and S-K-0-D-A from 1999 onwards.

Driver Box OBD2 IMMO Deactivator & Activator

This box corresponds to the B-0-s-c-h control unis types EDC15 (Diesel) 

and ME7 (Patrol).

The EDC15 control for diesel engines is installed in the models of brands V--W, A-U-D-1,S-E-A-T and S-K-0-D-A from 1999 onwards.

The ME7 control for Patrol engines up from 1.6 I is also installed

in the models of brands V--W, A-U-D--1,S-E-A-T and S-K-0-D-A.

Also backed up are control unit types ME7.5, ME7.5.1, ME7.1, ME7.1.1

 

Use guide:

Simply plug the Drive Box EDC15/ME7 into the vehicle's diagnostic socket (OBD2)

Then put the OBD2 and switch to '' OFF ''on Drive box .

After only 20 to 30 seconds the immobilizer DEACTIVATED (IMMO OFF)

NO NEED TO COMPUTER!!!

The led on the tool will start to flash slowly, after some seconds the led flashes fast, that mean the immo function is disabled

The car will work without Trasponder key!

Recovery ; switch to '' ON '' on Drive box .

After only 20 to 30 seconds the immobilizer ACTIVATED (IMMO ON)

 

Basically applies:not for 1,8T and 2,0TFSI models + 1.4 + 1.6 patrol engines.

The Tool on this page are sold exclusively to autohoritis and tradespersons with special legatimation for the automobile industry!

 Car Spark Plug Tester Ignition Testers Car Checker Automotive Diagnostic Tool Double Hole Analyzer for 12V Gasoline Vehicles Petrol

Features:

1.Connect the tester between the spark plug and the plug cable simply, the screw assembly quickly and easily adjusts the spark plug. The clips are securely clamped to the ground to prevent high-energy sparks from directly hitting any floor.

2.The normal spark is purple blue and the ignition is regular, abnormal spark color slants yellow, slants red, or indirect interruption.

3.You can quickly and easily diagnose whether the car ignition system is working properly with it, avoiding fire, burnout of ignition coil and etc.

4.It provides a secure and reliable way of fault diagnosis which is convenient, economical and time-saving.

5.Manufactured with premium material for long-lasting durability.

 Smart Key Matching Device OBD For Toyota Smart Key Maker For Toyota Lexus 4D and 4C chip OBD2 Smart Key Matching Programmer

For Toyota Smart Key Maker OBD for 4D Chip (Support for Toyota Lexus Smart Key)

Top 6 Reasons To Get Smart Key Maker For Toyota:

1.Safe and efficient: Only need 20 seconds to add one key

2.It is safe for the security alarm system

3.Support all kinds of Toyota and Lexus smart key system: support K line and CAN-BUS protocols

4.It is the most safe and fast key programmer device for Toyota and Lexus series till now.

5.It supports all key lost

6.Please read the operation instructions and important notice before making a key

Function:

1.Use the main key to add the other keys:

Connect the programmer to the OBD port of the car, there are some short beep sounds after power on, it enters auto search car status.

Press the start button twice to wake up the anti-theft module. When the connection with the module is done successfully after 7 seconds, there is a long beep 4-5 sounds (4 sounds means the system is IV K system, 5 sounds means V CANBUS system). Wait 30 seconds, there are a long beep sounds, it means the car enter into add key state.

2.Add smart key:

put the original car key (with the logo side) access to the start button, you should hear two beep sounds. SEC light will flash twice; within 5 seconds, put the key close to the start button, you should hear 2 beep sound, SEC light will flash twice; after learn all the smart key, wait 30 seconds till SEC light begin flash, and the car will close adaptation mode automatically.

3.All the key was lost or only have vice key, need to do initialization:

Press constantly the LED button, and plug into the OBD port of the car, after two short beep sounds, finish press, it enters into auto search car status.

Press the start button twice, in order to wake the anti-theft computer. When the connection with the Computer of car is done successfully after 7 seconds, there is a long beep 4-5 sound (4 sounds mean the system is IV K system, 5 sounds mean V CANBUS system), 5 seconds later, LED light go out. Wait 10-16 minutes,there are a long beep sounds, and LED light flicker, it means the car enter into study key state.

All keys lost matching mode: Add every smart key which need to program(with the logo side)access to the start button, meanwhile you will here two beep sound. SEC light will shine twice; After you finisher studying all the smart keys, wait 30 seconds till SEC light shining, the system will Auto-close study state

For Toyota Smart Keymaker OBD Notice:

1.Must use the right new smart keymaker, and follow the right step above, otherwise you take the consequences.

2.If the device can not match the key, and LED light shining constantly, pls clear the error code by using anti-theft system such as T300.

3.After finishing program keys, the key can strat but the SEC light is still turn on, maybe you use the vice key, only main key can manually shut the study mode.

4.Don't try to open the cover of programmer and dash board, otherwise you take the consequences.

5.This machine is only provided for the legal auto repair. Otherwise you will take the above consequences.

 The Function of Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink :

1.Read/Clear DTC

2.Engine RPM

3.Module Reset

4.Module Activation

5.Remote Control

6.Regeneration

7.Automatic sleep/start

8.Battery Tester

 XTool AD10 Functions

Reads fault codes. Erases fault codes and display code descriptions problems - both standard and OEM codes.

Measure the fuel consumption.
Display real-time operating performance of the car, such as momentum, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake temperature, and more.

Turn off the MIL (signal Check Engine).

Download data to external media in avariety of formats for later printing.
Record various parameters, display graphics in real time, and more.